Plug in the cable into a USB port on your computer, you must ONLY use this USB port from here-on for this cable.Put the DVD that arrived with the cable into the DVD drive on your PC.Thank you to whomever is hosting the above files and I hope that you do not mind me providing these links. Download the software There are many sources on the internet for INPA/EDIABAS, some seem to work, others do not - I used these specific downloads and they worked perfectly: ** UNFORTUNATELY THE DOWNLOAD LINKS ARE NO LONGER AVAILABLE - BUT I WILL SEE WHAT I CAN DO ** If for any reason the above links are missing/broken, PM me and I'll see what I can do. This is the specific cable that I purchased and that I can confirm works: 2. The cable I purchased is a USB to OBD2 connector that plugs into your BMW to the right hand side of the steering wheel, in the foot-well area. Buy a cable I purchased a USB cable from EBay, it came with software but I didn't use it and instead used online resources that I downloaded for which I'll provide links. This guide assumes that you have a basic knowledge of Windows, Control Panel and Device Manager.INPA/DIS – The most common version is 5.0.2. Install INPA/EDIABAS right here! This is mandatory and complements your stage 2 upgrade of INPA/EDIABAS/WinKFP/NCS. This is remaked ShopLifeTV tutorial How to Setup BMW INPA NCSEXPERT. This setup/installation DOES NOT give you NCS Expert or anything other than above mentioned.This setup/installation DOES give you INPA and EDIABAS 6.4.7 and 5.0.2.This setup/installation DOES work on an E46 (my car).This setup/installation DOES NOT require VM/Virtual Machine images.

Ncs expert vin is faulty